\u4ece\u5b98\u7f51\u4e0b\u8f7d\u6700\u65b0\u56fa\u4ef6\uff0c\u75283CDeamon\u8bbe\u7f6etftp\u670d\u52a1\u5668\uff0cIP\u5730\u5740\u8bbe\u7f6e\u4e3a\u4e0e\u7ba1\u7406\u53e3\u6216\u6570\u636e\u53e3\u540c\u7f51\u6bb5\uff0c\u7ba1\u7406\u53e3\u9ed8\u8ba4IP\u4e3a192.168.50.50\uff0c\u6570\u636e\u53e3\u9ed8\u8ba4IP\u4e3a192.168.49.50\uff0c\u4e0b\u9762\u793a\u4f8b\u662f\u901a\u8fc7\u7ba1\u7406\u53e3\u4f20\u8f93\u56fa\u4ef6\u3002<\/p>\n
\u5148\u5347\u7ea7boot-image\uff1acopy tftp boot-image<\/p>\n
\u518d\u5347\u7ea7OS: copy tftp image2<\/p>\n
\u91cd\u542f\uff1areload<\/p>\n
\u91cd\u542f\u540e\u68c0\u67e5\u7248\u672c\uff1ashow\u00a0 version<\/p>\n
image2\u5347\u7ea7\u5b8c\u6210\u5e76\u7ecf\u8fc7\u6d4b\u8bd5\u65e0\u95ee\u9898\u540e\u53ef\u5347\u7ea7image1\uff1acopy tftp image1<\/p>\n
\u5207\u6362image1\u548cimage2\u7684\u547d\u4ee4\uff1aboot\u00a0image\u00a0{image1|image2}<\/p>\n
\u6709\u65f6\u5347\u7ea7\u524d\u7684\u4ea4\u6362\u673a\u7248\u672c\u7279\u6b8a\u5982\u975e\u5e38\u4f4e\uff0c\u5728 tftp \u65f6\u53ef\u80fd\u5931\u8d25\uff0c\u6362\u5176\u5b83\u4e0d\u540c\u7684 tftp \u670d\u52a1\u5668\u5373\u53ef
\n\u4e00\u5b9a\u8981\u628a\u4e24\u6587\u4ef6\u90fd\u4e0a\u4f20\u540e\uff0c\u518d\u91cd\u8d77\u4ea4\u6362\u673a
\n\u5728\u4ece\u8f83\u4f4e\u7684\u7248\u672c\u5982 VER 1.0 \u5347\u7ea7\u5230\u4e00\u4e2a\u5f88\u9ad8\u7684\u7248\u672c\u5982 VER 7.6\u65f6\uff0c\u4e00\u5b9a\u8981\u4ed4\u7ec6\u9605\u8bfb\u5347\u7ea7\u8981\u6c42\u8bf4\u660e\uff0c\u4e0d\u80fd\u76f4\u63a5\u5347\u5230\u6700\u7ec8\u7684\u7248\u672c\uff0c\u8981\u5148\u5347\u7ea7\u5230\u4e00\u4e2a\u4e2d\u95f4\u7684\u7248\u672c\u5982 VER 6.8\u3002<\/p>\n
Enter login username: admin
\nEnter login password:<\/p>\n
RS G7028>en<\/p>\n
Enable privilege granted.
\nRS G7028#ping 192.168.50.3
\nConnecting via MGT port.
\n[host 192.168.50.3, max tries 5, delay 1000 msec, length 0, ping source N\/S, ttl 255, tos 0]
\n192.168.50.3: #1 ok, RTT 1 msec.
\n192.168.50.3: #2 ok, RTT 0 msec.
\n192.168.50.3: #3 ok, RTT 1 msec.
\n192.168.50.3: #4 ok, RTT 0 msec.
\n192.168.50.3: #5 ok, RTT 1 msec.
\nPing finished.
\nRS G7028#conf t
\nEnter configuration commands, one per line. End with Ctrl\/Z.
\nRS G7028(config)#copy tftp boot-image
\nPort type [\"DATA\"\/\"MGT\"]: MGT
\nAddress or name of remote host: 192.168.50.3
\nSource file name: G7028-8.4.11.0-Boot.imgs<\/p>\n
boot kernel currently contains Software Version 8.4.6
\nNew download will replace boot kernel with file \"G7028-8.4.11.0-Boot.imgs\"
\nfrom SFTP\/FTP\/TFTP server 192.168.50.3.
\nConnecting via MGT port.
\nConfirm download operation (y\/n) ? y
\nImage download started to boot kernel<\/p>\n
Download Failed
\nError: File not found or access violation.<\/p>\n
RS G7028(config)#copy tftp boot-image
\nPort type [\"DATA\"\/\"MGT\"]: MGT
\nAddress or name of remote host: 192.168.50.3
\nSource file name: G7028-8.4.11.0_Boot.imgs<\/p>\n
boot kernel currently contains Software Version 8.4.6
\nNew download will replace boot kernel with file \"G7028-8.4.11.0_Boot.imgs\"
\nfrom SFTP\/FTP\/TFTP server 192.168.50.3.
\nConnecting via MGT port.
\nConfirm download operation (y\/n) ? y
\nImage download started to boot kernel
\nFile appears valid
\nDownload in progress
\n.....................................................................................................................................
\nDownload Complete
\nValid image detected.<\/p>\n
Extracting images ... Do *NOT* power cycle the switch.
\nWriting to flash...Please wait
\nProcessing RFS: 100% - done
\nProcessing kernel: 100% - done
\nProcessing DFT: 100% - done
\nProcessing Boot loader: 100% - done
\nBoot loader updated successfully<\/p>\n
Boot Sector now contains Software Version 8.4.11<\/p>\n
File processed<\/p>\n
RS G7028(config)#copy tftp image2
\nPort type [\"DATA\"\/\"MGT\"]: MGT
\nAddress or name of remote host: 192.168.50.3
\nSource file name: G7028-8.4.11.0_OS.imgs<\/p>\n
image2 currently contains Software Version 8.4.6
\nNew download will replace image2 with file \"G7028-8.4.11.0_OS.imgs\"
\nfrom SFTP\/FTP\/TFTP server 192.168.50.3.
\nConnecting via MGT port.<\/p>\n
WARNING: This operation will overlay the currently booting image.
\nConfirm download operation (y\/n) ? y
\nImage download started to image2
\nFile appears valid
\nDownload in progress
\n.........................................................................................................................................................................
\nDownload Complete
\nValid image detected.<\/p>\n
Extracting images ... Do *NOT* power cycle the switch.
\nWriting to flash...Please wait
\nProcessing Application: Installing image as image2: 100% - done
\nImage2 updated successfully<\/p>\n
Verification of new image2 in FLASH successful.
\nimage2 now contains Software Version 8.4.11<\/p>\n
RS G7028(config)#reload
\nWARNING: The running-config is different to startup-config.
\nConfirm operation without saving running-config to startup-config (y\/n) ? y<\/p>\n
Reset will use software \"image2\" and the factory default config block.
\n>> Note that this will RESTART the Spanning Tree,
\n>> which will likely cause an interruption in network service.
\nConfirm reload (y\/n) ? y
\nGenerating the dump support file
\nResetting at 09:03:32 Mon Oct 1, 2018...<\/p>\n
**** System Reset from boot iscli ****
\nDisable the Mgmt Port ...
\nDisable the Transceivers ...
\nUnmount the File System ...
\nUnmounting filesystem
\nWait for umount to finish.Done
\nWaiting for I2C Transactions to Finish ...
\n\u2592<\/p>\n
U-Boot 2014.01 (May 07 2018 - 15:09:10)<\/p>\n
CPU: P1010, Version: 2.0, (0x80f10020)
\nCore: e500, Version: 5.2, (0x80212152)
\nClock Configuration:
\nCPU0:800 MHz,
\nCCB:400 MHz,
\nDDR:400 MHz (800 MT\/s data rate) (Asynchronous), IFC:100 MHz
\nL1: D-cache 32 KiB enabled
\nI-cache 32 KiB enabled
\nBoard: Rack Switch G7028, CPLD: V5, PCBA: V2
\nI2C: ready
\nDRAM: 512 MiB (DDR3, 16-bit, CL=7, ECC off)
\nPress shift-B for boot menu or shift-R for recovery mode: .....
\nBooting production mode
\nFlash: 32 MiB
\nL2: 256 KiB enabled
\nNAND: 256 MiB
\nno link, regs @ 0xffe0a000
\nPCIe1: Bus 00 - 00
\n02:00.0 - 14e4:b321 - Network controller
\nPCIe2: Bus 01 - 02
\nIn: serial
\nOut: serial
\nErr: serial
\nNet: eTSEC1, eTSEC2 [PRIME]
\nUpdating boot environment MAC address
\nBooting OS<\/p>\n
starting version 3.1.5<\/p>\n
Mon Oct 1 09:03:58 UTC 2018
\nBooting image '2'
\nImage signature verified.
\nUnpacking image: 100%
\nRunning install script
\nInstalling system libraries<\/p>\n
Initializing Production Mode .....
\nEarly Initialization Done. (3 secs)
\n256MB w\/2048-128KB sectors
\nPCI unit 0: Dev 0xb321, Rev 0x12, Chip BCM56321_B1, Driver BCM56334_B0<\/p>\n
Rebooted because of reset from console.<\/p>\n
Oct 1 09:04:18 0.0.0.0 CRIT system: Redundant Power Supply not Installed<\/p>\n
Oct 1 09:04:56 192.168.49.50 INFO mgmt: Telnet is disabled<\/p>\n
Oct 1 09:04:56 192.168.49.50 INFO mgmt: HTTP is disabled<\/p>\n
Oct 1 09:04:56 192.168.49.50 INFO mgmt: FTP is disabled<\/p>\n
Oct 1 09:04:56 192.168.49.50 INFO mgmt: SNMP v1v2 and v3 are disabled
\nBooting complete 09:04:56 Mon Oct 1, 2018:
\nVersion 8.4.11 from FLASH image2, factory default configuration.<\/p>\n
Lenovo RackSwitch G7028.<\/p>\n
Enter password:<\/p>\n
Enter password:
\nOct 1 09:04:56 192.168.49.50 INFO system: booted version 8.4.11 from FLASH image2, factory default configuration<\/p>\n
Oct 1 09:04:56 192.168.49.50 INFO system: Assigned default IP 192.168.49.50 to data interface<\/p>\n
Oct 1 09:04:56 192.168.49.50 INFO system: Assigned default IP 192.168.50.50 to mgmt interface<\/p>\n
Oct 1 09:04:56 192.168.49.50 NOTICE mgmt: Booting up with compatibility mode.<\/p>\n
Oct 1 09:04:56 192.168.49.50 NOTICE system: Switch is in Legacy Mode. Enable Secure Mode policy for pre-defined security configuration, if required<\/p>\n
Oct 1 09:04:57 192.168.49.50 NOTICE system: SR_SFP+ 850nm inserted at port XGE1 is Approved.<\/p>\n
Oct 1 09:04:57 192.168.49.50 NOTICE system: SR_SFP+ 850nm inserted at port XGE3 is Approved.<\/p>\n
Oct 1 09:04:57 192.168.49.50 NOTICE system: SR_SFP+ 850nm inserted at port XGE4 is Approved.<\/p>\n
Oct 1 09:04:59 192.168.49.50 NOTICE link: link up on port XGE1<\/p>\n
Oct 1 09:04:59 192.168.49.50 ALERT stg: STG 1, topology change detected<\/p>\n
Oct 1 09:04:59 192.168.49.50 INFO SLP: URL service:io-device.Lenovo:management-module:\/\/192.168.49.50 registered locally<\/p>\n
Oct 1 09:04:59 192.168.49.50 INFO SLP: URL service:io-device.Lenovo:management-module:\/\/192.168.50.50 registered locally<\/p>\n
Oct 1 09:04:59 192.168.49.50 ALERT link: link up on management port MGMT<\/p>\n
Oct 1 09:04:59 192.168.49.50 NOTICE lldp: LLDP neighbor discovered (Chassis = 88 ae 1d d2 79 84, local port = MGMT)<\/p>\n
Oct 1 09:05:00 192.168.49.50 NOTICE link: link up on port XGE4<\/p>\n
Oct 1 09:05:29 192.168.49.50 NOTICE lldp: LLDP neighbor discovered (Chassis = a4 8c db b6 37 00, local port = XGE1)<\/p>\n
Oct 1 09:05:29 192.168.49.50 ALERT stg: STG 1, topology change detected<\/p>\n
Oct 1 09:05:30 192.168.49.50 NOTICE lldp: LLDP neighbor discovered (Chassis = a4 8c db b6 37 00, local port = XGE4)<\/p>\n
Enter password:<\/p>\n
WARNING: You are using the default password, please change it as soon as possible to keep system secure.<\/p>\n
RS G7028>
\nOct 1 09:05:44 192.168.49.50 WARNING mgmt: You are using the default password, please change it as soon as possible to keep system secure.<\/p>\n
RS G7028>en<\/p>\n
Enable privilege granted.
\nRS G7028#show run
\nCurrent configuration:
\n!
\nversion \"8.4.11\"
\nswitch-type \"Lenovo RackSwitch G7028\"
\niscli-new
\n!
\n!<\/p>\n
!
\n!
\n!
\n!
\n!
\n!
\n!
\n!
\n!interface ip 1
\n! addr <default>
\n! enable
\n!
\n!interface ip 128
\n! addr <default>
\n! enable
\n!
\n!
\n!
\n!
\n!
\nend<\/p>\n","protected":false},"excerpt":{"rendered":"
\u51c6\u5907\u5de5\u4f5c \u4ece\u5b98\u7f51\u4e0b\u8f7d\u6700\u65b0\u56fa\u4ef6\uff0c\u75283CDeamon\u8bbe\u7f6etftp\u670d\u52a1\u5668\uff0cIP\u5730\u5740\u8bbe\u7f6e\u4e3a\u4e0e\u7ba1\u7406\u53e3\u6216\u6570\u636e\u53e3\u540c\u7f51\u6bb5\uff0c\u7ba1\u7406 […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[26],"tags":[],"class_list":["post-202","post","type-post","status-publish","format-standard","hentry","category-26"],"_links":{"self":[{"href":"https:\/\/www.hncldz.com\/index.php?rest_route=\/wp\/v2\/posts\/202","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.hncldz.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.hncldz.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.hncldz.com\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.hncldz.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=202"}],"version-history":[{"count":4,"href":"https:\/\/www.hncldz.com\/index.php?rest_route=\/wp\/v2\/posts\/202\/revisions"}],"predecessor-version":[{"id":230,"href":"https:\/\/www.hncldz.com\/index.php?rest_route=\/wp\/v2\/posts\/202\/revisions\/230"}],"wp:attachment":[{"href":"https:\/\/www.hncldz.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=202"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.hncldz.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=202"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.hncldz.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=202"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}